AFTER-SALES SERVICE 07 5597 0864
Product Range / IG Auto Control Fully Automated

Duet Sunveil

TD27FMC (Double glazing 27mm) Sunveil

Technical Specifications

01Reduction gear

Micro-reduction gear with diam. 18mm, placed in a special plastic support inside the aluminium profile. This micro-reduction gear is controlled by a special 12V motor, controlled by the control unit. Transmission ratio R=231. Slow shaft speed – 30/40RPM. Max. current absorbed 1A Precise broached steel body (degree 7) M0.40 high precision gears, in treated steel, mechanically machined. Slow shaft supported by 2 ball bearings diam. 8/16 H5.

02Duette fabric

Polyester with 20mm pleat, not flameproof, colours available: 4 in the filtering version.

03Control unit complete with 12 V
switching power pack

Electronic control unit with 2-4-6-8-10-12 channels to manage movement of blinds and their endblocks. Management of fast automatic function until endblocks or to the desired level and slow single and/or group manual function. Software system with power supply management and safety management in case of accidental blockage of blind. Possibility of movement through wall button or radio control, system can be connected to home automation system.

04Extruded aluminium profiles

The extruded profiles are made from aluminium alloy EN AW 6060 with a chemical composition defined by standard EN 573-3, created to the design and according to an innovative project by the IG Blinds technical department. The metallurgical state of supply is T5 unless otherwise specified, according to the standard UNI EN 5415, with mechanical characteristics according to standard UNI EN-755-2. Chemical silver oxidised box and back.
Dimensions of box: 22 x 44.90 (part with flap)/42.90 (part without flap) mm
Dimension of back: 19.80 x 25mm.

05Cords

Made from 100% polyester with 100% 280/2 x 3

Entwined polyester core: 16 ends
Diameter: 1mm
Traction resistance: 120-200N
Treatment: stabilised
Colour tests: Xenon test 6

 

Feasibility table

Colour specifications

0201
4440